MikroTik RouterBoard 1200 Manuel d'utilisateur télécharger pdf (Page 4)

RouterBOARD 411 Series User's Manual

Specifications

RouterBOARD 411

CPU MIPS24k based, Atheros AR7130 300MHz CPU

Memory 32MB SDRAM onboard memory

Boot loader RouterBOOT

Data storage 64MB onboard NAND memory chip

Ethernet One 10/100 Mbit/s Fast Ethernet ports supporting Auto-MDI/X

MiniPCI slot One MiniPCI Type IIIA/IIIB slot

Serial port One DB9 RS232C asynchronous serial port

LEDs Power and User LED, 5 status LEDs

Speaker Mini PC-Speaker

Power options

Power over Ethernet: 12..28V DC (except power over datalines)

Power jack: 9..28V DC

Dimensions 105mm x 105mm

Weight 115 g (4.06 oz)

Temperature Operational: -20°C to +65°C (-4°F to 149°F)

Humidity Operational: up to 70% relative humidity (non-condensing)

Power consumption 3-4W without extension cards, maximum – 14W

Hardware Guide

Memory and Storage Devices

Onboard Memory

The board is equipped with 32 MB DDR onboard memory.

Onboard NAND Storage Device

The boards are equipped with one 64MB NAND nonvolatile memory chip.

Extension Slots

MiniPCI Slots

The board has one MiniPCI Type IIIA slot with 3.3V only power signaling. It also accepts MiniPCI Type IIIB

standard cards. The board has been tested to operate with high power cards if ambient temperature and

adequate cooling is ensured.

NOTE: that RB400 series currently does not support Senao 8602 cards, Atheros AR5211 or older chipset

and Prism chipset based cards. Wireless compression is not supported on RB400 series devices.

Supplied power for the extension cards (excluding CPU and onboard Ethernet ports):

+3.3V: 3.3A max

Input/Output Ports

LAN1 Port with PoE

This Fast Ethernet port is recognized as the first LAN interface. It is compatible with passive (non-standard)

Power over Ethernet. The board accepts voltage input from 12 to 28 V DC. It is suggested to use higher

voltages for power over long cables because of better efficiency (less power is lost in the cable itself and

power supply is more efficient).

1 2 3 4 5 6 7 8

Pas de commentaire

MikroTik RouterBoard 1200 Manuel d'utilisateur Page 4